7' 10" L X 15" W EZ Traction Aluminum Car Trailer Ramps, Plate End, Knife Foot - 5,000 lb. Per Axle
Key Features:
- Plate end connector with knife foot
- Aluminum construction with EZ traction surface
- Each ramp measures 7' 10" L x 15" W x 3.25" H
EZ Traction Punch Plate
The unique punched surface features smoothed serrations that grip tires while allowing rain, mud and ice to pass through.
Plate End
Plate ends provide a smooth ramp-to-trailer transition, and are used in conjunction with safety tie-down straps to prevent kick-outs and keep the ramp firmly in place.
Knife Foot
Graded all the way to the ground, the knife foot provides a smooth ground-to-ramp transition. The knife edge should be as flush to the ground as possible within the acceptable height range for optimal use.
Load and haul cars, trucks and equipment onto trailers with this pair of lightweight 7' 10" L aluminum truck trailer ramps that feature a plate end and a knife foot with an EZ punch plate surface traction.
Made in the USA, these ramps are constructed from lightweight aluminum and feature an EZ Traction punch plate surface that grips tires in wet, icy or other inclement conditions. The tops of the ramps have a plate-style connecting end that rests directly on the trailer bed. The knife foot ramp ends provide a smoother ground-to-ramp transition while loading and unloading.
Each ramp measures 7' 10" L x 15" W x 3.25" H. At 40 lbs. per ramp, they are light enough to be maneuvered by one person for set-up, take down and storage. For correct use with the knife foot design, set up between 16" to 24" H.
- Plate end connector with knife foot
- Aluminum construction with EZ traction surface
- Each ramp measures 7' 10" L x 15" W x 3.25" H