Skip to Main Content Skip to Footer Content

10' L X 20" W Aluminum Car Trailer Ramps, Hook End, Knife Foot - 5,000 lb. Per Axle

$1,629.99
Select Length
Select Width
Select Height
ITEM #05-20-120-04-LP-LOW
In Stock, Ready to Ship
Delivered in 3 to 5 Business Days

Key Features:

  • Hook end connector with knife foot
  • Aluminum construction with serrated rung traction
  • Each ramp measures 10' L x 20" W x 3.25" H

See More…

Features

Serrated Rung Traction

Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.

Hook End

Prevent kickouts without requiring the use of safety straps with hook ends. They fit over existing rub or round rails up to 1-5/16” diameter, and the pressure of a vehicle loading or unloading keeps them securely in position.

Knife Foot

Graded all the way to the ground, the knife foot provides a smooth ground-to-ramp transition. The knife edge should be as flush to the ground as possible within the acceptable height range for optimal use.

Technology & Features
Specifications
Made in the USA
Length:
10'
Width:
20"
Height:
3-1/4"
Weight:
68 lbs. per ramp
Minimum Height:
12"
Maximum Height:
20"
Foot Type:
Knife
Attaching End:
Hook
Maximum Capacity:
5,000 lbs. per axle
Material:
Aluminum
Surface Type:
Rung
More Information

Load and haul cars, trucks and equipment onto trailers with this pair of lightweight 10' L aluminum truck trailer ramps that feature a hook end and a knife foot with serrated rung traction.

Made in the USA, these ramps are constructed from lightweight aluminum and feature flat, serrated rungs that grip tires in wet, icy or other inclement conditions while allowing road debris, gravel and mud to pass through. The tops of the ramps have a hook-style connecting end that hooks over existing rub or round rails up to 1-5/16" diameter. The knife foot ramp ends provide a smoother ground-to-ramp transition while loading and unloading.

Each ramp measures 10' L x 20" W x 3.25" H. At 68 lbs. per ramp, they are light enough to be maneuvered by one person for set-up, take down and storage. For correct use with the knife foot design, set up between 12" to 20" H.

  • Hook end connector with knife foot
  • Aluminum construction with serrated rung traction
  • Each ramp measures 10' L x 20" W x 3.25" H
Usage Guidelines
Never exceed the maximum axle capacity of this ramp system. The best way to determine the axle weight of the vehicle being loaded is to drive the heaviest axle of the vehicle on a scale. Normally, the front end of the vehicle has the heaviest axle weight because of the engine location.

We stand by our Products! This HD Ramps product is backed by a 1 year warranty and is guaranteed to be free of defects at time of purchase.

How To Read Our Part Numbers
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Reviews
Q&A