10' L X 16" W Aluminum Car Trailer Ramps, Hook End, Knife Foot - 5,000 lb. Per Axle
Key Features:
- Hook end connector with knife foot
- Aluminum construction with serrated rung traction
- Each ramp measures 10' L x 16" W x 4.75" H
Serrated Rung Traction
Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.
Hook End
Prevent kickouts without requiring the use of safety straps with hook ends. They fit over existing rub or round rails up to 1-5/16” diameter, and the pressure of a vehicle loading or unloading keeps them securely in position.
Knife Foot
Graded all the way to the ground, the knife foot provides a smooth ground-to-ramp transition. The knife edge should be as flush to the ground as possible within the acceptable height range for optimal use.
Load and haul cars, trucks and equipment onto trailers with this pair of lightweight 10' L aluminum truck trailer ramps that feature a hook end and a knife foot with serrated rung traction.
Made in the USA, these ramps are constructed from lightweight aluminum and feature flat, serrated rungs that grip tires in wet, icy or other inclement conditions while allowing road debris, gravel and mud to pass through. The tops of the ramps have a hook-style connecting end that hooks over existing rub or round rails up to 1-5/16" diameter. The knife foot ramp ends provide a smoother ground-to-ramp transition while loading and unloading.
Each ramp measures 10' L x 16" W x 4.75" H. At 47 lbs. per ramp, they are light enough to be maneuvered by one person for set-up, take down and storage. For correct use with the knife foot design, set up between 20" to 36" H.
- Hook end connector with knife foot
- Aluminum construction with serrated rung traction
- Each ramp measures 10' L x 16" W x 4.75" H