8' L x 20" W 4 Bunk Load Leveler / 4 Ramp System for 20" H Step Deck Trailers - 23,500 lb. Cap
Key Features:
- Complete ramp system converts to load levelers
- For 102” W step deck trailers with 20” upper step drop
- This system includes: four 8’ ramps, two support stands, four load leveler spacers, 12 lumber clips, eight stake pocket supports
Ramps/Load Levelers
These ramps are used for loading, or can be turned on their side and used as load levelers. The width of the ramps will vary based on the height of your step deck to ensure that when they are used as load levelers they will be the appropriate size.
Ramp Support Stands
These not only ensure that the two ramps per side will be able to support the loading weight of your cargo, but they are also adjustable in case you need to create a slight arch to help with the loading process. This is important with vehicles or machinery that have a long wheelbase and/or lower ground clearance, so they don’t high-center at the top of the ramps.
Load Lever Spacers
These are sized to be used with 24” and 26” H step decks. The correct size is included in each kit, and they are placed on top of the load levelers before the lumber clip and dunnage.
Lumber Clips
They attach to the load levelers and hold lumber to prevent the levelers from scratching or otherwise damaging your load. When pacing lumber, always use wood planks that are true to size to ensure a secure fit. Kits include 3 lumber clips per load leveler.
Stake Pocket Supports
They keep your load levelers in position by securing them at stake pocket locations, so you can customize where you place your levelers. Kits include 2 stake pockets supports per load leveler. A chain will be passed over the top to secure them, and the load levelers in place for transit.
Affordable, lightweight, and safe, this ramp system converts to load levelers to maximize the hauling capability of 102” W step deck trailers with a 20” upper step drop.
The safest system on the market, these ramps have a 23,500 lb. per axle weight capacity for handling heavy equipment loading with ease. The ramps convert to load levelers by turning them on their side and inserting them into the adjustable stakes which fit into the truck's stake pockets. The stakes ensure the load levelers will fit all 102" wide step deck trailers (97" to 98" W measured from inside of stake pockets) without any modifications. To install, simply slide the pin-on end of the ramps into the stake pockets, chain them down with load binders and you've created a high-weight capacity loading system for your long loads.
This system includes: four 8’ ramps, two support stands, four load leveler spacers, 12 lumber clips, eight stake pocket supports. For maximum safety, each step deck kit includes three lumber clips and two stake pocket inserts per load leveler.
- Complete ramp system converts to load levelers
- For 102” W step deck trailers with 20” upper step drop
- This system includes: four 8’ ramps, two support stands, four load leveler spacers, 12 lumber clips, eight stake pocket supports