Dry Van Truck Trailer Ramp System w/Support Stands - 5,000 lb. per Axle
$6,041.99
MSRP
Pricing shown as of 11/4/2026. Please note that prices are subject to change without notice.
Key Features:
- Loading ramp system for dry vans and box trucks
- Each 20' L side includes two 10' L ramps measuring 20" W; 5,000 lb. per axle capacity
- Aluminum construction with flat serrated rung traction
Features
Made in the USA; supports 5,000 lbs. per axle
The ramps and support stands are manufactured in the Midwest to ensure the highest quality construction. The system is designed for loading vehicles such as cars, pickup trucks and wheeled equipment into dry vans.
Serrated Rung Traction
Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.
Technology & Features
Technology & Features
Specifications
Made in the USA
Description:
Two-Piece Support Stands
Length:
20'
Width:
20"
Height:
3-1/4"
Weight:
380 lbs. per system
Minimum Height:
40"
Maximum Height:
54"
Maximum Capacity:
5,000 lbs. per axle
Surface Type:
Rung
More Information
Engineered for easier, safer loading, the HD Ramps Modular Truck Trailer Ramp System is a lightweight solution for loading cars, pickup trucks, four-wheeled powersports vehicles (ATVs, UTVs), wheeled equipment and more into a box truck, semi-trailer, dry van or similar transportation method. This heavy-duty loading system includes four 10' loading ramps and two center support stands.
Manufactured of high-strength aluminum, this ramp system supports up to 5,000 lbs. per axle and comes with height adjustable center ramp supports to create the perfect loading angle depending on the ground clearance and wheelbase of the vehicle being loaded. Extra-wide serrated rungs on the ramps ensure excellent tire traction in all weather conditions.
At the top of the ramps where they meet the truck, full-width plate ends with rubber bonding underneath reduces slippage. On the ground edge, the angled knife foot ends ensure a smooth transition onto and off of the ramps. The ramps connect to the support stands with pin-on end connectors, which keeps the pieces interconnected for safer loading. To prevent ramp kick-out, two included heavy-duty cam buckle tie-down straps wrap around the ramps and anchor to the ICC bumper.
- Loading ramp system for dry vans and box trucks
- Each 20' L side includes two 10' L ramps measuring 20" W; 5,000 lb. per axle capacity
- Aluminum construction with flat serrated rung traction
Usage Guidelines
Not recommended for forklifts, steel track vehicles, or skid loaders! The best way to determine your vehicle's axle weight is to drive the heaviest axle on a scale. Normally the front of your car, SUV, or pick-up truck is the heaviest axle weight because of the engine.
Compare With Similar Items
Compare With Similar Items
Aluminum Modular Truck Trailer Ramp System for Dry Van with 2-Piece Support Stands - 5,000 lb per axle Capacity
$6,041.99
MSRP
Pricing shown as of 11/4/2026. Please note that prices are subject to change without notice.
Length:
20'
Width:
20"
Maximum Height:
54"
Minimum Height:
40"
Maximum Capacity:
5,000 lbs. per axle
Weight:
380 lbs. per system
Brand:
HD Ramps
Current Item
Length:
14'
Width:
16"
Maximum Height:
42"
Minimum Height:
36"
Maximum Capacity:
12,000 lbs. per axle
Weight:
115 lbs.
Material:
Aluminum
Brand:
HD Ramps
Length:
7' 10"
Width:
15"
Maximum Height:
24"
Minimum Height:
16"
Maximum Capacity:
5,000 lbs. per axle
Weight:
37 lbs. per ramp
Material:
Aluminum
Brand:
HD Ramps
Length:
7' 6"
Width:
14"
Maximum Height:
36"
Minimum Height:
24"
Maximum Capacity:
10,000 lbs. per axle
Weight:
47 lbs.
Material:
Aluminum
Brand:
HD Ramps
Reviews
Reviews
Q&A
Q&A