Skip to Main Content Skip to Footer Content

10' L x 20" W Aluminum Car Trailer Ramps, Pin-On End, Knife Foot - 5,000 lb. Per Axle

ITEM #05-20-120-01
In Stock, Ready to Ship
Delivered in 3 to 5 Business Days

Key Features:

  • Pin-on end connector with knife foot
  • Aluminum construction with flat serrated rung traction
  • Each ramp measures 10' L x 20" W x 3.25" H

See More…


Serrated Rung Traction

Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.

Pin-On End

The most secure connection style for industrial and commercial ramps, pin-on ends have a hollow tube that rest in a pre-installed skid seat (sold separately). A pin or rod secures the ramp to the skid seat so it cannot slip off, fall out, or be removed without removing the pin.

Knife Foot

Graded all the way to the ground, the knife foot provides a smooth ground-to-ramp transition. The knife edge should be as flush to the ground as possible within the acceptable height range for optimal use.

Technology & Features
Made in the USA
72 lbs. per ramp
Minimum Height:
Maximum Height:
Foot Type:
Attaching End:
Maximum Capacity:
5,000 lbs. per axle
Surface Type:
More Information

Load and haul cars, trucks and equipment onto trailers with this pair of lightweight 10' L aluminum truck trailer ramps that feature a pin-on end and a knife foot with serrated rung traction.

Made in the USA, these ramps are constructed from lightweight aluminum and feature flat, serrated rungs that grip tires in wet, icy or other inclement conditions while allowing road debris, gravel and mud to pass through. The tops of the ramps have a pin-on connecting end that secures to welded or bolted skid seat receiving brackets (sold separately) making it impossible for them to kick out when vehicles are loaded and ensuring the safest connection available. The knife foot ramp ends provide a smoother ground-to-ramp transition while loading and unloading.

Each ramp measures 10' L x 20" W x 3.24" H. At 72 lbs. per ramp, they are light enough to be maneuvered by one person for set-up, take down and storage. For correct use with the knife foot design, set up between 24" to 30" H.

  • Pin-on end connector with knife foot
  • Aluminum construction with flat serrated rung traction
  • Each ramp measures 10' L x 20" W x 3.25" H
Usage Guidelines
Never exceed the maximum axle capacity of this ramp system. The best way to determine your vehicles axle weight is to drive the heaviest axle of the vehicle on a scale. Normally the front end of the vehicle has the heaviest axle weight because of the engine.

We stand by our Products! This HD Ramps product is backed by a 1 year warranty and is guaranteed to be free of defects at time of purchase.

How To Read Our Part Numbers
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to