8' L X 18" W Aluminum Car Trailer Ramps, Hook End, Stub Foot - 5,000 lb. Per Axle
$1,352.99
MSRP
Pricing shown as of 5/7/2026. Please note that prices are subject to change without notice.
Key Features:
- Hook end connector with stub foot
- Aluminum construction with serrated rung traction
- Each ramp measures 8' L x 18" W x 2.25" H
Frequently Bought Together
Features
Serrated Rung Traction
Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.
Hook End
Prevent kickouts without requiring the use of safety straps with hook ends. They fit over existing rub or round rails up to 1-5/16” diameter, and the pressure of a vehicle loading or unloading keeps them securely in position.
Stub Foot
For greater versatility in height range, the stub foot features a reinforced rectangular end that allows you to position the ramp at the angle you need without compromising the strength of the construction.
Automobile Ramp Calculator
Fill in the form to see the minimum ramp length you need.
Please enter Wheelbase.
Please enter Ground Clearance.
Please enter Loading Height.
Minimum ramp length = ft.
Technology & Features
Technology & Features
Specifications
Made in the USA
Length:
8'
Width:
18"
Height:
2-1/4"
Weight:
52 lbs. per ramp
Minimum Height:
12"
Maximum Height:
24"
Foot Type:
Stub
Attaching End:
Hook
Maximum Capacity:
5,000 lbs. per axle
Material:
Aluminum
Surface Type:
Rung
More Information
Load and haul cars, trucks and equipment onto trailers with this pair of lightweight 8' L aluminum truck trailer ramps that feature a hook end and a stub foot with serrated rung traction.
Made in the USA, these ramps are constructed from lightweight aluminum and feature flat, serrated rungs that grip tires in wet, icy or other inclement conditions while allowing road debris, gravel and mud to pass through. The tops of the ramps have a hook-style connecting end that hooks over existing rub or round rails up to 1-5/16" diameter. The stub foot ramp ends offer greater versatility in loading heights.
Each ramp measures 8' L x 18" W x 2.25" H. At 52 lbs. per ramp, they are light enough to be maneuvered by one person for set-up, take down and storage. For correct use with the stub foot design, set up between 12" to 24" H.
- Hook end connector with stub foot
- Aluminum construction with serrated rung traction
- Each ramp measures 8' L x 18" W x 2.25" H
Usage Guidelines
Never exceed the maximum axle capacity of this ramp system. The best way to determine your vehicles axle weight is to drive the heaviest axle of the vehicle on a scale. Normally the front end of the vehicle has the heaviest axle weight because of the engine.
Compare With Similar Items
Compare With Similar Items
8' L x 18" W Aluminum Hook End Car Trailer Ramps - 5,000 lb. per axle Capacity
$1,352.99
MSRP
Pricing shown as of 5/7/2026. Please note that prices are subject to change without notice.
Brand:
HD Ramps
Surface Type:
Rung
Maximum Capacity:
5,000 lbs. per axle
Length:
8'
Width:
18"
Weight:
52 lbs. per ramp
Current Item
Reviews
Reviews
Q&A
Q&A