5' L x 15" W Lay-Over Trailer Ramp Extensions, Hook End, Knife Foot - 5,000 lb. Per Axle
Key Features:
- Hook end connector with knife foot
- Aluminum construction with EZ traction surface
- Each ramp extension measures 5' L x 15" W x 2" H
Serrated Rung Traction
Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.
Hook End
Prevent kickouts without requiring the use of safety straps with hook ends. They fit over existing rub or round rails up to 1-5/16” diameter, and the pressure of a vehicle loading or unloading keeps them securely in position.
Knife Foot
Graded all the way to the ground, the knife foot provides a smooth ground-to-ramp transition. The knife edge should be as flush to the ground as possible within the acceptable height range for optimal use.
Lay these heavy-duty trailer ramp extensions over two-beam loading ramps to reduce the approach angle for lower profile vehicles and equipment.
The ramp extensions feature the same serrated cross bars as the loading ramps, for traction in wet or muddy conditions. Integrated hooks rest in-between trailer ramp cross bars, preventing the lay-over ramps from kicking out while the vehicle is being loaded.
- Hook end connector with knife foot
- Aluminum construction with EZ traction surface
- Each ramp extension measures 5' L x 15" W x 2" H