Skip to Main Content Skip to Footer Content

5' L X 12" W Aluminum Car Trailer Ramps, Hook & Plate Hybrid End, Stub Foot - 3,000 lb. Per Axle

$739.99
Select Length
Select Attaching End
ITEM #03-12-060-046-S
In Stock, Ready to Ship
Delivered in 3 to 5 Business Days

Key Features:

  • Hook/plate hybrid end connector with stub foot
  • Aluminum construction with serrated rung traction
  • Each ramp measures 5' L x 12" W x 1.75" H

See More…

Features

Serrated Rung Traction

Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.

Hook/Plate Hybrid End

The best of both worlds, the hook fits over existing rub or round rails up to 1-5/16” in diameter, and the plate end provides a smooth ramp-to-trailer transition.

Stub Foot

For greater versatility in height range, the stub foot features a reinforced rectangular end that allows you to position the ramp at the angle you need without compromising the strength of the construction.

Technology & Features
Specifications
Made in the USA
Length:
5'
Width:
12"
Height:
1-3/4"
Weight:
18 lbs. per ramp
Minimum Height:
4"
Maximum Height:
16"
Foot Type:
Stub
Attaching End:
Hook/Plate Hybrid
Maximum Capacity:
3,000 lbs. per axle
Material:
Aluminum
Surface Type:
Rung
More Information

Load and haul cars, trucks and equipment onto trailers with this pair of lightweight 5' L aluminum truck trailer ramps that feature a hook/plate hybrid end and a stub foot with serrated rung traction.

Made in the USA, these ramps are constructed from lightweight aluminum and feature flat, serrated rungs that grip tires in wet, icy or other inclement conditions while allowing road debris, gravel and mud to pass through. The tops of the ramps have a hybrid plate and hook-style connecting end that combines the plate connector that rest on the trailer deck with the hook design the for an easy ramp-to-deck transition that hooks over existing rub or round rails up to 1-5/16" diameter. The stub foot ramp ends offer greater versatility in loading heights.

Each ramp measures 5' L x 12" W x 1.75" H. At 18 lbs. per ramp, they are light enough to be maneuvered by one person for set-up, take down and storage. For correct use with the stub foot design, set up between 4" to 16" H.

  • Hook/plate hybrid end connector with stub foot
  • Aluminum construction with serrated rung traction
  • Each ramp measures 5' L x 12" W x 1.75" H
Usage Guidelines
Never exceed the maximum axle capacity of this ramp system. The best way to determine the axle weight of the vehicle being loaded is to drive the heaviest axle of the vehicle on a scale. Normally, the front end of the vehicle has the heaviest axle weight because of the engine location.

We stand by our Products! This HD Ramps product is backed by a 1 year warranty and is guaranteed to be free of defects at time of purchase.

How To Read Our Part Numbers
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Reviews
Q&A