Skip to Main Content Skip to Footer Content

4' L X 15" W Aluminum Car Trailer Ramps, Plate End, Knife Foot - 5,000 lb. Per Axle

Select Length
ITEM #05-15-048-06
In Stock, Ready to Ship
Delivered in 3 to 5 Business Days

Key Features:

  • Plate end connector with knife foot
  • Aluminum construction with serrated rung traction
  • Each ramp measures 4' L x 15" W x 2" H

See More…


Serrated Rung Traction

Each flattened, welded rung is horizontally serrated for better water run-off and tire traction. Large pieces of debris pass straight through the open design.

Plate End

Plate ends provide a smooth ramp-to-trailer transition, and are used in conjunction with safety tie-down straps to prevent kick-outs and keep the ramp firmly in place.

Knife Foot

Graded all the way to the ground, the knife foot provides a smooth ground-to-ramp transition. The knife edge should be as flush to the ground as possible within the acceptable height range for optimal use.

Technology & Features
Made in the USA
23 lbs. per ramp
Minimum Height:
Maximum Height:
Foot Type:
Attaching End:
Maximum Capacity:
5,000 lbs. per axle
Surface Type:
More Information

Load and haul cars, trucks and equipment onto trailers with this pair of lightweight 4' L aluminum truck trailer ramps that feature a plate end and a knife foot with serrated rung traction.

Made in the USA, these ramps are constructed from lightweight aluminum and feature flat, serrated rungs that grip tires in wet, icy or other inclement conditions while allowing road debris, gravel and mud to pass through. The tops of the ramps have a plate-style connecting end that rests directly on the trailer bed. The knife foot ramp ends provide a smoother ground-to-ramp transition while loading and unloading.

Each ramp measures 4' L x 15" W x 2" H. At 23 lbs. per ramp, they are light enough to be maneuvered by one person for set-up, take down and storage. For correct use with the knife foot design, set up between 8" to 12" H.

  • Plate end connector with knife foot
  • Aluminum construction with serrated rung traction
  • Each ramp measures 4' L x 15" W x 2" H
Usage Guidelines
Never exceed the maximum axle capacity of this ramp system. The best way to determine the axle weight of the vehicle being loaded is to drive the heaviest axle of the vehicle on a scale. Normally, the front end of the vehicle has the heaviest axle weight because of the engine location.

We stand by our Products! This HD Ramps product is backed by a 1 year warranty and is guaranteed to be free of defects at time of purchase.

How To Read Our Part Numbers
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to